Taking the Film Cartridge Out of the Cartridge
Holder
1. Make sure the film is wound in the holder. If the film is not
wound, it will be visible through the window shown
below.
c
Caution:
Do not open the cover if you see film in the window.
Otherwise you may scratch or tear the film. If film is
wound in the cartridge holder, see "Winding film in
the film cartridge holder" in Chapter 7.
2. Open the film cartridge cover by turning the knob on the
cover to the OPEN position. Remove the cartridge.
Scanning Images From Your Film Cartridge
window
5-19
5