Selecting A Destination Device And Media Size; Adding Destination Settings - Epson FILMSCAN 200 User Manual

Selecting a Destination Device and Media Size

Read the following for details on selecting which device
to send the scanned image file to, and see page 6-6 for
information on selecting what size to reproduce the scanned
image file at.

Adding Destination settings

Use the Destination dialog box to add new destination devices
or to change the resolution and calibration settings for existing
devices. To access this dialog box, click the Destination button
in the EPSON TWAIN window. The Destination dialog box
appears as shown below.
To add a new destination (output) device, enter the name of the
new device in the Destination Name box by highlighting and
then overwriting the name that is already displayed in the box.
To make the Resolution and Calibration settings, select a
predefined setting or highlight the setting that is displayed and
overwrite it with your custom setting. Then click Save.
Getting to Know More About EPSON TWAIN
6
6-3