Table of Contents
Advertisement
12. Click OK to close the EPSON Scanner Setup dialog box. The
program creates an EPSON Scanner Settings icon in the
Control Panel, creates an EPSON Scanner group, and places
the EPSON Screen Calibration icon is in the EPSON Scanner
group.
When you have finished the entire installation, perform the
EPSON Screen Calibration as described on page 3-12.
Installing the software in Windows 3.1x or NT 3.5x
Make sure that the film carrier contains film as described on
page 3-2 and is loaded in the scanner; then follow the steps
below to install the software in Windows 3.1x or NT 3.5x:
1. Turn on the computer. Start Windows 3.1 or NT 3.5x.
2. Insert the scanner software CD shipped with your scanner in
the CD-ROM drive.
3. Open File Manager, then click the CD-ROM drive.
4. Open the EPSON directory and the Disk 1 subdirectory; then
double-click SETUP.EXE. Follow the instructions on the
screen.
When you see the following EPSON TWAIN Setup dialog box,
follow the steps on page 3-5 from step 6.
3-8
Setting Up the Scanner Software
Hide quick links:
Advertisement
Table of Contents
