Connecting the Parallel Interface Model
Compatible operating systems
You can connect the EPSON FilmScan 200 (parallel interface
model) to a PC running the Windows 95 or 3.1 operating
system.
Note:
EPSON FilmScan 200 (parallel interface model) is incompatible with
Windows NT and Macintosh.
Installing the parallel interface board
EPSON FilmScan 200 (parallel interface model) requires a
bidirectional interface in your computer and a standard
shielded, twisted-pair parallel interface cable.
Check your computer's specifications to see if its built-in
parallel interface is bidirectional or not. If it is not bidirectional
or if your computer does not have an available bidirectional
parallel interface, install the interface board packed with your
scanner. You also may need to change jumper settings on the
board so the settings do not conflict with your computer's
built-in parallel interface. To install the bidirectional interface
board, see the user's guide that came with the interface board.
Note:
Use of the EPSON Bidirectional Parallel Interface Board
(B80818 ) packed with your scanner is recommended.
Remember the I/O address of the parallel interface board. You
will need it when you install the scanner software later.
2-2
Connecting EPSON FilmScan 200 to Your Computer