Parallel Interface Model - Epson FILMSCAN 200 User Manual

Back

Parallel interface model

Ground connector
Connect the ground wire
here if your interface cable
has one.
AC inlet
Connect the power
cord here.
SCSI interface model
Ground connector
Connect the ground wire
here if your interface
cable has one.
AC inlet
Connect the power
cord here.
50-pin SCSI connector
Connect the 50-pin end of
a SCSI cable here.
1-8
Getting Started
Parallel interface connector
Connect the parallel interface
cable here.
Terminator switch
Use this to turn the SCSI
terminator on or off.
SCSI ID rotary dial
Set the SCSI ID here.
25-pin SCSI connector
Connect the 25-pin end of
a SCSI cable here.