Lights And Buttons; Transporting The Scanner; Scanning With Epson Twain Pro - Epson B107011F - GT 10000 Product Information Manual

EPSON GT-10000

Lights and Buttons

The scanner has three indicator lights and two buttons on its
control panel. A ] Start button is located beside the
document table. Light status and button functions are
described in the tables that follow.
ERROR
light
Scanner indicator lights
Light Light status
READY On
Flashing
ERROR On
Flashing
Scanner buttons
Button Function
OPERATE Turns the scanner on and off.
P
RESET Initializes the scanner.
Automatically launches a
]
Start
application. You must set up your scanner software
and a compatible application to use this feature with
any application other than Presto! PageManager.
If you installed Presto! PageManager, it's
automatically assigned to the
set up Presto! PageManager to scan your image
automatically and send it directly to another application
or a peripheral device, such as a printer.
Error conditions
ERROR light READY light
On On
5 - EPSON GT-10000
RESET button
OPERATE button
OPERATE
light
READY
light
Color Scanner status
Green Ready to scan images
Scanning in progress
Red An error has occurred
]
Start button-compatible
]
Start button. You can
Error type
Command error: The scanner has
received incorrect commands from
the scanning software. Try rescanning.
Error conditions
Flashing Off
Flashing Flashing
Off Off

Transporting the Scanner

When you transport the scanner a long distance or store it for
an extended time, follow these steps to secure the carriage:
1. Make sure the transportation lock on the side of the scanner
is in the
UNLOCK
2. If you're using an automatic document feeder, remove it and
replace the scanner cover.
3. Turn on the scanner and wait until the carriage moves to the
home position (toward the left of the scanner). Then turn
off the scanner.
If the scanner is inoperable, the carriage may not
automatically return to the home position. If it
doesn't, raise the right side of the scanner and
hold it up until the carriage comes to rest at the
left side. Then turn the transportation lock to the
locked position.
4. Slide the transportation lock to the

Scanning with EPSON TWAIN Pro

Here is a brief overview of the scanning steps using EPSON
TWAIN Pro (or EPSON TWAIN Pro Network).
1. Open your host application (for example, PhotoDeluxe
Business Edition).
2. Select your scanner source. (Unless you change your source,
you need to do this step only once.)
For example, if you're using PhotoDeluxe Business Edition
as your host application, click the
Click the
Get Photo
button. Select
Scanners
1/00
Interface error: Make sure the scanner
is securely connected to the
computer, and then turn the scanner
off and back on again.
Fatal error: Make sure the
transportation lock is released, and
then turn the scanner off and back on
again.
Option error: There's a problem with
the ADF unit. Make sure the ADF is
flat against the document table. Make
sure it is securely connected to the
ADF connector at the back of the
scanner. Finally, make sure the ADF
isn't out of paper and doesn't have a
paper jam.
position.
position.
LOCK
Get & Fix Photo
tab, then click the arrow below the
EPSON TWAIN Pro
button.
and click .
OK