Connecting The Scsi Interface Model; Compatible Operating Systems - Epson FILMSCAN 200 User Manual

3. Plug the 36-pin end of the cable into the scanner's interface
connector. Then squeeze the wire clips together until they
lock in place on both sides.
See Chapter 3 for instructions on installing the scanner
software. You must install the scanner software before using
your scanner.

Connecting the SCSI Interface Model

Compatible operating systems

You can connect the EPSON FilmScan 200 (SCSI interface
model) to a Macintosh or a PC running Windows 95, 3.1, or NT.
If your PC does not have a SCSI board installed, you need to
install one according to the directions that come with the SCSI
board. If your PC already has a SCSI board, connect the scanner
as described in the next section.
2-4
Connecting EPSON FilmScan 200 to Your Computer