Base And Emulsion Sides; Loading 35 Mm Negatives And Positives - Epson FILMSCAN 200 User Manual

35 mm slides
Each slide consists of a single image cut from a positive film
strip and mounted in a plastic casing or other slide frame.
Maximum allowable slide thickness is 2 mm.

Base and emulsion sides

When loading film into the carrier, always load it so that the
glossy, base side is facing up (the emulsion side should face
down). The film manufacturer's name and film ID numbers are
readable on the base side. Or when you look at the base side,
the picture should appear in its correct orientation.

Loading 35 mm Negatives and Positives

To prepare 35 mm negative or positive strip film (strips of up
to 6 images) for scanning, read this section.
Film carrier (for 35 mm strip film)
35 mm strip film
Scanning 35 mm Film Images
4
4-3