Scsi Connections - Epson FILMSCAN 200 User Manual

Note:
If you use Windows 95 or NT, use the SCSI driver included in
Windows 95 or NT (see your system documentation for instructions)
or the driver described in the SCSI board installation documentation.
2
If you use Windows 3.1, use the driver packed with the SCSI board
as described in the SCSI board installation documentation.
All Macintosh computers have SCSI ports; you do not need
to install a SCSI board in a Macintosh. Follow the directions
below to set up and connect your scanner and computer.

SCSI connections

The SCSI interface allows you to connect up to eight devices,
including the computer, in what is called a "daisy chain"
arrangement. Only the first SCSI device in a daisy chain is
connected to the computer; each of the other devices is
connected to the previous device.
other SCSI device
computer scanner other SCSI device
Note:
Before purchasing a SCSI cable or setting up your SCSI daisy chain,
be sure your SCSI cable(s) has the right combination of 50-pin and
25-pin connectors. The combination you need may vary depending
on the maker of your SCSI device and SCSI interface board.
2-5
Connecting EPSON FilmScan 200 to Your Computer