Setting The Aspect Ratio; Setting The Parental Lock - Pioneer DVH-P5000UB Operation Manual

Operating this unit

Setting the aspect ratio

There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display you use.
! When using a regular display, select either
LETTER BOX or PAN SCAN. Selecting 16:9
may result in an unnatural picture.
1 Move the thumb pad up or down to se-
lect TV ASPECT.
2 Click the thumb pad.
TV aspect menu is displayed.
3 Move the thumb pad left or right to se-
lect the desired TV aspect.
! 16:9 – Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX – The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PAN SCAN – The picture is cut short at the
right and left of the screen
4 Click the thumb pad.
The selected TV aspect is set.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! When playing discs that do not specify
PAN SCAN, playback is with LETTER BOX
even if you select PAN SCAN setting. Confirm
whether the disc package bears the
mark. (See page 10.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc's instruc-
tions.

Setting the parental lock

Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the par-
ental lock to your desired level.
! To perform this function, set the remote
control to DVD mode.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parantal lock.
! We recommend to keep a record of your
code number in case you forget it.
1 Move the thumb pad up or down to se-
lect PARENTAL.
2 Click the thumb pad.
Parental lock setting menu is displayed.
3 Press 0 to 9 to input a four digit code
number.
4 Move the thumb pad left or right to
move the cursor to the previous or next po-
sition.
5 Move the cursor to the last position by
moving the thumb pad right after entering
the four digit code number.
The code number is set, and you can now set
16 : 9 LB
the level.
6 Move the thumb pad left or right to se-
lect the desired level.
! LEVEL 8 – Playback of the entire disc is pos-
sible (initial setting)
Section
02
49
En