Playing Tracks In Random Order; Scanning Folders And Tracks; Selecting Audio Output - Pioneer DVH-P5000UB Operation Manual

Operating this unit
Notes
! If you perform chapter search, track search or
fast forward/reverse, the repeat play range
changes to DISC.
! If you select another folder during repeat play,
the repeat play range changes to DISC.
! When playing back compressed audio or
DivX, if you perform track search or fast for-
ward/reverse during TRACK, the repeat play
range changes to FOLDER.
! When playing back Video CD or CD, if you per-
form track search or fast forward/reverse dur-
ing TRACK, the repeat play range changes to
DISC.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
! When playing discs with compressed audio
and audio data (CD-DA), repeat play performs
within the currently playing data type even if
DISC is selected.

Playing tracks in random order

Tracks in a selected repeat range are played in
random order.
Refer to Repeating play on the previous page.
! This function is available for CD and com-
pressed audio disc.
% Press RDM to turn random play on.
Tracks play in a random order.
# To turn random play off, press RDM again.
Note
You can also turn this function on or off in the
menu that appears by using MULTI-CONTROL.

Scanning folders and tracks

Scan play lets you hear the first 10 seconds of
each track on the CD.
When playing the compressed audio disc, the
first 10 seconds of each track of the current
folder (or the first track of each folder) is
played.
Refer to Repeating play on the previous page.
! This function is available for CD and com-
pressed audio disc.
1 Use MULTI-CONTROL to select SCAN in
the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3 When you find the desired track press
MULTI-CONTROL to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by using
MULTI-CONTROL.
# After scanning of a disc (folder) is finished,
normal playback of the tracks begins.

Selecting audio output

When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing Video CD discs, you can switch
between stereo and monaural audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
! If you select LINEAR PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 51.)
1 Use MULTI-CONTROL to select
LR SELECT in the function menu.
Refer to Introduction to advanced operations
on the previous page.
Section
02
33
En