Setting The Menu Language; Switching The Assist Subtitle On Or Off; Setting The Angle Icon Display - Pioneer DVH-P5000UB Operation Manual

Section
02 Operating this unit
4 Click the thumb pad.
The audio language is set.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
! You can also switch the audio language dur-
ing playback with AUDIO. (Refer to Changing
audio language during playback (Multi-audio)
on page 28.)
! Even if you use AUDIO to switch the audio
language, this does not affect the settings
here.
! If you have selected OTHERS, refer to When
you select OTHERS on the previous page.

Setting the menu language

You can set the preferred language for dis-
plays of menus recorded on a disc.
1 Move the thumb pad up or down to se-
lect MENU LANGUAGE.
2 Click the thumb pad.
A menu language menu is displayed.
3 Move the thumb pad left or right to se-
lect the desired menu language.
4 Click the thumb pad.
The menu language is set.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
! If you have selected OTHERS, refer to When
you select OTHERS on the previous page.
48
En
Switching the assist subtitle on
or off
If assist subtitles are recorded on a DVD disc,
you can display them by turning the assist
subtitle function on.
You can turn assist subtitles on or off as de-
sired.
1 Move the thumb pad up or down to se-
lect ASSIST.
2 Click the thumb pad.
3 Move the thumb pad left or right to se-
lect on or off.
Each time you move the thumb pad left or
right the selected setting switches on or off.
4 Click the thumb pad.
The assist subtitle is set on or off.
# Pressing RETURN takes you back to the pre-
vious display.

Setting the angle icon display

You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1 Move the thumb pad up or down to se-
lect ANGLE.
2 Click the thumb pad.
3 Move the thumb pad left or right to se-
lect on or off.
Each time you move the thumb pad left or
right the selected setting switches on or off.
4 Click the thumb pad.
Angle icon display is set on or off.
# Pressing RETURN takes you back to the pre-
vious display.