Operating this unit
! When this unit's blue/white lead is connected
to the car's auto-antenna relay control term-
inal, the car's antenna extends when this
unit's source is turned on. To retract the an-
tenna, turn the source off. (When you con-
nected a Pioneer multi-channel processor
(DEQ-P6600) to this unit, auto-antenna cannot
be controled.)
Adjusting the volume
% Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn MULTI-CONTROL to
increase or decrease the volume.
With the remote control, press VOLUME to in-
crease or decrease the volume.
Tuner
Basic Operations
When the separately sold display is connected
to this unit, the listed information will appear
on it.
% Select a band
Press BAND.
# Band can be selected from among FM1, FM2,
FM3 or MW/LW.
% Manual tuning (step by step)
Push MULTI-CONTROL left or right.
% Seek tuning
Push and hold MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release MULTI-CONTROL.
Note
RDS (radio data system) contains inaudible infor-
mation that helps search for the radio stations.
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS sta-
tion.
! This unit's AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 21).
Section
02
19
En