Using Compression And Bass Emphasis; Using Its Playlists - Pioneer DVH-P5000UB Operation Manual

Section
03 Available accessories
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
% Press COMP repeatedly to select the de-
sired setting.
OFF—COMP1—COMP2—OFF—DBE1—
DBE2
# If the multi-CD player does not support
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
Note
You can also select setting in the menu that ap-
pears by using MULTI-CONTROL.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
Refer to Introduction to advanced operations
on the previous page.
62
En
3 Select the desired track by pushing
MULTI-CONTROL left or right.
4 Push MULTI-CONTROL up to store the
currently playing track in the playlist.
MEMORY COMPLETE is displayed and the
currently playing selection is added to your
playlist.
5 Press BAND to return to the ordinary
display.
Note
After data for 100 discs is stored in memory, data
for a new disc will overwrite the oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player begin to play.
1 Select the repeat range.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select ITS PLAY
in the function menu.
Refer to Introduction to advanced operations
on the previous page.
3 Press MULTI-CONTROL to turn ITS play
on.
ON appears in the display. Playback begins of
those tracks from your playlist within the pre-
viously selected MCD or DISC ranges.
# If no tracks in the current range are pro-
grammed for ITS play, then EMPTY is displayed.
# To turn ITS play off, press MULTI-CONTROL
again.