Setting Angle Icon Display; Setting The Aspect Ratio; Setting The Parental Lock - Pioneer AVH-P7500DVD Operation Manual

Setting up the DVD
player
2 Touch ASSIST SUB TITLE.
3 Touch a to turn assist subtitles on.
# To turn assist subtitles off, touch b.

Setting angle icon display

You can set up that the angle icon appears on
scenes where the angle can be switched.
1 Touch SETUP and VISUAL and then
touch MULTI ANGLE.
2 Touch a to turn angle icon display on.
# To turn angle icon display off, touch b.

Setting the aspect ratio

There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to REAR MONITOR
OUT.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16 : 9
may result in an unnatural picture.
! If you select the TV aspect, this units dis-
play changes to the same setting.
1 Touch SETUP and VISUAL and then
touch TV ASPECT.
2 Touch any of the following touch panel
keys to select the TV aspect.
! 16 : 9  Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX  The picture is the shape of a
letter box with black bands at the top and
bottom of the screen
Downloaded from Caradio-Manual.com Manuals
! PANSCAN  The picture is cut short at the
right and left of the screen
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX
even if you select the PANSCAN setting. Con-
firm whether the disc package bears the
mark. (See page 12.)
16 : 9 LB
! Some discs do not enable changing of the TV
aspect. For details, refer to the discs in-
structions.

Setting the parental lock

Some DVD video discs let you use parental
lock to restrict the viewing of violent and adult
oriented scenes by children. You can set the
parental lock level in steps as desired.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 09 to input a four digit code
number.
3 While the input number is displayed,
touch ENTER.
The code number is set, and you can now set
the level.
Section
16
85
En