Selecting The Play Mode; Switching The Information Display - Pioneer DVH-P5000UB Operation Manual

Operating this unit
2 Use MULTI-CONTROL to select
TITLE INPUT in the function menu.
Refer to Introduction to advanced operations
on page 32.
3 Push MULTI-CONTROL up or down to
select a letter of the alphabet.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
5 Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push MULTI-CONTROL right one
more time, the entered title is stored in mem-
ory.
6 Press BAND to return to the ordinary
display.
Notes
! Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
! After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
! When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.

Selecting the play mode

You have two methods for playing DVD-VR
disc; ORIGINAL (original) and PLAYLIST (play-
list).
! Titles created with DVD recorders are
called original. Based on original, rear-
ranged titles are called playlist. Playlists
are created on DVD-R/RW discs.
! This function is available for DVD-VR.
1 Use MULTI-CONTROL to select the play-
list mode in the function menu.
Refer to Introduction to advanced operations
on page 32.
2 Press MULTI-CONTROL to switch the
play mode.
If the play mode is changed, playback starts
from the beginning of the selected play mode.

Switching the information display

When the separately sold display is connected
to this unit, the following information will ap-
pear on it.
Section
02
35
En