Grip - Yamaha YZ250F(V) Owner's Service Manual

HANDLEBAR
EC5B3000
REMOVAL POINTS
Brake master cylinder
1. Remove:
• Brake master cylinder bracket 1
• Brake master cylinder 2
CAUTION:
• Do not let the brake master cylinder hang
on the brake hose.
• Keep the brake master cylinder cap side
horizontal to prevent air from coming in.
EC5B3200

Grip

1. Remove:
• Grip 1
NOTE:
Blow in air between the handlebar or tube
guide and the grip. Then remove the grip
which has become loose.
EC5B4000
INSPECTION
EC5B4100
Handlebar
1. Inspect:
• Handlebar 1
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar lower holder 1
• Washer 2
• Nut (handlebar lower holder) 3
NOTE:
• Install the handlebar lower holder with its
side having the greater distance a from the
mounting bolt center facing forward.
• Apply the lithium soap base grease on the
thread of the handlebar lower holder.
• Installing the handlebar lower holder in the
reverse direction allows the front-to-rear off-
set amount of the handlebar position to be
changed.
• Do not tighten the nut yet.
5 - 44
CHAS