Removing/Installing Reclining Armrests - Invacare Formula Powered Seating Owner's Operator And Maintenance Manual

Removing/Installing Reclining Armrests

NOTE: For this procedure, refer to FIGURE 7.3.
Removing Armrests
1. Lift the armrest release lever at the front of the wheelchair to the unlocked (horizontal)
position.
2. Lift up on the armrest and remove from the front arm socket.
3. Press the release button at the rear of
the armrest in.
4. While holding the release button in,
remove the armrest from the seat
frame.
Installing Armrests
1. Position the armrest on the seat frame
as shown in FIGURE 7.3.
2. Press the release button at the rear of
the armrest in.
3. While holding the release button in,
slide the armrest onto the seat frame.
4. Make sure the armrest release lever is
in the unlocked (horizontal) position.
5. Install the armrest into the front socket.
6. Push the armrest release lever down
into the locked (vertical) position.
Part No 1122170
All manuals and user guides at all-guides.com
55
Locked
(DOWN -
VERTICAL)
Unlocked
(UP -
HORIZONTAL)
FIGURE 7.3 Removing/Installing Reclining
Armrests
Formula™ Powered Seating
SECTION 7—ARMS
Release
Button
Armrest
Release Lever