Snmp-Agent Log; Snmp-Agent Mib-View - HP 6125XLG Command Reference Manual

snmp-agent log

Use snmp-agent log to enable logging SNMP operations.
Use undo snmp-agent log to disable logging SNMP operations.
Syntax
snmp-agent log { all | get-operation | set-operation }
undo snmp-agent log { all | get-operation | set-operation }
Default
SNMP logging is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
all: Enables logging SNMP Get and Set operations.
get-operation: Enables logging SNMP Get operations.
set-operation: Enables logging SNMP Set operations.
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent for auditing NMS
behaviors. The SNMP agent sends log data to the information center. You can configure the information
center to output the data to a specific destination as needed.
Examples
# Enable logging SNMP Get operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP Set operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation

snmp-agent mib-view

Use snmp-agent mib-view to create or update a MIB view.
Use undo snmp-agent mib-view to delete a MIB view.
Syntax
snmp-agent mib-view { excluded | included } view-name oid-tree [ mask mask-value ]
undo snmp-agent mib-view view-name
97