Terminal Debugging - HP 6125XLG Command Reference Manual

A local user can use this command only after being authorized as the security log administrator by the
system administrator. For more information about security log administrator, see Security Configuration
Guide.
Examples
# Manually save the security logs in the security log file buffer into the security log file.
<Sysname> security-logfile save
The contents in the security log file buffer have been saved to the file
flash:/seclog/seclog.log.

terminal debugging

Use terminal debugging to enable the display of debug information on the current terminal.
Use undo terminal debugging to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is disabled on the current terminal.
Views
User view
Predefined user roles
network-admin
Usage guidelines
To view debug information, execute the terminal monitor and terminal debugging commands, enable
the information center (enabled by default), and use a debugging command to enable the related
debugging.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the default is restored.
You can also execute the terminal logging level 7 command to enable the display of debug information
on the current terminal. However, this command also enables the display of all other log information. Use
a proper command as needed.
Examples
# Enable the display of debug information on the current terminal.
<Sysname> terminal debugging
The current terminal is enabled to display debugging information.
Related commands
• terminal logging level
terminal monitor
•
76