Display Snmp-Agent Group - HP 6125XLG Command Reference Manual

Community name: userv1
Group name: testv1
Storage-type: nonVolatile
Table 19 Command output
Field
Community name
Group name
ACL
Storage-type
Related commands
snmp-agent community
•
snmp-agent usm-user { v1 | v2c }
•

display snmp-agent group

Use display snmp-agent group to display SNMP group information, including the group name, security
model, MIB view, and storage-type.
Syntax
display snmp-agent group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode and an
SNMPv3 group name in FIPS mode, a case-sensitive string of 1 to 32 characters.
Description
Displays the community name created by using the snmp-agent community command
or the username created by using the snmp-agent usm-user { v1 | v2c } command.
SNMP group name.
•
If the community is created by using the snmp-agent community command, the
group name is the same as the community name.
•
If the community is created by using the snmp-agent usm-user { v1 | v2c } command,
the name of the group that has the user is displayed.
Number of the ACL that controls the access of the NMSs in the community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access the device with
the community name.
Storage type:
•
volatile—Settings are lost when the system reboots.
•
nonVolatile—Settings remain after the system reboots.
•
permanent—Settings remain after the system reboots and can be modified but not
deleted.
•
readOnly—Settings remain after the system reboots and cannot be modified or
deleted.
•
other—Any other storage type.
80