Info-Center Logbuffer Size - HP 6125XLG Command Reference Manual

undo info-center logbuffer
Default
Logs are allowed to be output to the log buffer.
Views
System view
Predefined user roles
network-admin
Examples
# Configure output of log information to the log buffer.
<Sysname> system-view
[Sysname] info-center logbuffer
Related commands
• display logbuffer
info-center enable
•

info-center logbuffer size

Use info-center logbuffer size to set the maximum number of logs that can be stored in the log buffer.
Use undo info-center logbuffer size to restore the default.
Syntax
info-center logbuffer size buffersize
undo info-center logbuffer size
Default
The log buffer can store up to 512 logs.
Views
System view
Predefined user roles
network-admin
Parameters
buffersize: Specifies the maximum number of logs that can be stored in the log buffer, in the range of 0
to 1024. The default value is 512.
Examples
# Set the maximum number of logs that can be stored in a log buffer to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
# Restore the default maximum log buffer size.
<Sysname> system-view
[Sysname] undo info-center logbuffer size
60