Ping, Tracert, And System Debugging Commands; Debugging - HP 6125XLG Command Reference Manual

Ping, tracert, and system debugging
commands

debugging

Use debugging to enable debugging for a specific module.
Use undo debugging to disable debugging for a specific module.
Syntax
debugging { all [ timeout time ] | module-name [ option ] }
undo debugging { all | module-name [ option ] }
Default
Debugging functions are disabled for all modules.
Views
User view
Predefined user roles
network-admin
Parameters
all: Enables all debugging functions.
timeout time: Specifies the timeout time for the debugging all command. When all debugging is enabled,
the system automatically executes the undo debugging all command after the timeout time. The time
argument is in the range of 1 to 1440 minutes.
module-name: Module name, such as arp or device. To display the current module name, use the
debugging ? command.
option: The debugging option for a specific module. The option number and content differ for different
modules. To display the supported options, use the debugging module-name ? command.
Usage guidelines
Output of debugging commands is memory intensive. To guarantee system performance, enable
debugging only for modules that are in an exceptional condition.
Examples
# Enable debugging for the device management module.
<Sysname> debugging dev
Related commands
display debugging
5