HP 6125XLG Command Reference Manual page 124

Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Displays the statistics for an NQA operation. The admin-name argument
represents the name of the administrator who creates the NQA operation, and is a case-insensitive string
of 1 to 32 characters. The operation-tag argument represents the operation tag, and is a case-insensitive
string of 1 to 32 characters. If these two arguments are not specified, the command displays statistics for
all NQA operations.
Usage guidelines
The statistics are generated after the NQA operation completes. If you issue the display nqa statistics
command before the operation completes, the statistics are displayed as all 0s.
If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the
period specified by the statistics internal command. If the threshold type is average value, result fields
display hyphens (-).
Examples
# Display the statistics for the UDP echo operation.
<Sysname> display nqa statistics admin test
NQA entry (admin admin, tag test) test statistics:
NO. : 1
Destination IP address: 192.168.0.58
Start time: 2011-01-01 05:59:14.5
Life time: 19 seconds
Send operation times: 184
Min/Max/Average round trip time: 2/44/4
Square-Sum of round trip time: 9117
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
Reaction statistics:
Index
1
Table 34 Command output
Field
No.
Start time
Life time
Send operation times
Receive response times
Min/Max/Average round trip time
Checked Element Threshold Type
probe-failure consecutive
Receive response times: 184
Checked Num
184
Description
Statistics group ID.
Time when the operation started.
Duration of the operation in seconds.
Number of probe packets sent.
Number of response packets received.
Minimum/maximum/average round-trip time in milliseconds.
122
Over-threshold Num
0