HP 6125XLG Command Reference Manual page 109

virt-authentication-failure
virt-bad-packet
virt-config-error
virt-retransmit
virtgrhelper-status-change
virtif-state-change
virtneighbor-state-change
standard: Specifies SNMP standard notifications.
Table 27 Standard SNMP notifications
Keyword
authentication
coldstart
linkdown
linkup
warmstart
system: Specifies notifications sent when the system time is modified, the system reboots, or the main
system software image is not available.
Usage guidelines
The snmp-agent trap enable command enables the device to generate notifications, including both
informs and traps, even though the keyword trap is used in the command.
You can use the snmp-agent target-host command to enable the device to send the notifications as
informs or traps to a host.
If no optional parameters are specified, the command or its undo form enables or disables all SNMP
notifications supported by the device.
Examples
# Enable the SNMP agent to send SNMP authentication failure traps to 10.1.1.1 in the community public.
<Sysname> system-view
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] snmp-agent trap enable standard authentication
ospfVirtIfAuthFailure
ospfVirtIfRxBadPacket
ospfVirtIfConfigError
ospfVirtIfTxRetransmit
ospfVirtNbrRestartHelperStatusChange
ospfVirtIfStateChange
ospfVirtNbrStateChange
Definition
Authentication failure notification sent when an NMS fails to authenticate to the SNMP
agent.
Notification sent when the device restarts.
Notification sent when the link of a port goes down.
Notification sent when the link of a port comes up.
Notification sent when the SNMP agent restarts.
107
Notifications for authentication
failures on OSPF virtual interfaces.
Notifications for OSPF packets
received on a virtual interface.
Virtual interface configuration
error notifications.
Notifications generated if OSPF
packets are received or forwarded
on a virtual interface.
Notifications for neighbor GR
Helper status changes of a virtual
interface.
Virtual interface status change
notifications.
Notifications generated if the
neighbor status of a virtual
interface has changed.