Table 51 Command output
Field
Mirroring group
Type
Status
Mirroring port
Monitor port
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to remove mirroring groups.
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a device.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Number of the mirroring group, in the range of 1 to 4.
local: Specifies a local mirroring group.
remote-destination: Specifies a remote destination group.
remote-source: Specifies a remote source group.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
Description
Number of the mirroring group.
Type of the mirroring group:
•
Local.
•
Remote source.
•
Remote destination.
Status of the mirroring group:
•
Active.
•
Incomplete—The mirroring group is not configured completely and cannot
take effect.
Source port.
Destination port.
190