Display Local-User - HP 6125XLG Command Reference Manual

mac mac-address: Specifies the MAC address of the user in the format H-H-H. This option applies only to
LAN users.
vlan vlan-id: Specifies the VLAN to which the user belongs. The vlan-id argument is in the range of 1 to
4094. This option applies only to LAN users.
Usage guidelines
Binding attributes are checked upon authentication of a local user. The user fails authentication in the
following situations:
The binding attributes of the local user do not match the configured attributes.
•
The local user does not have the configured binding attributes.
•
When you configure binding attributes for a local user, verify the following items:
The device can obtain from the user's packet all attributes for checking. For example, you can
•
configure an IP address binding for an 802.1X user, because 802.1X authentication can include the
user's IP address in the packet. However, you cannot configure IP address bindings for MAC
authentication users, because their packets do not include user IP addresses.
The binding interface type must meet the requirements of the local user. For example, you can bind
•
an 802.1X user to a physical port. If you bind the 802.1X user to a logical interface (for example,
a VLAN interface), the user will fail the local authentication.
Examples
# Bind IP address 3.3.3.3 with the network access user abc.
<Sysname> system-view
[Sysname] local-user abc class network
[Sysname-luser-network-abc] bind-attribute ip 3.3.3.3
Related commands

display local-user

display local-user
Use display local-user to display the local user configuration and online user statistics.
Syntax
display local-user [ class { manage | network } | idle-cut { disable | enable } | service-type { ftp |
lan-access | ssh | telnet | terminal } | state { active | block } | user-name user-name | vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
class: Specifies the local user type.
manage: Device management user.
•
network: Network access user.
•
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.
22