HP 6125XLG Command Reference Manual page 32

service-type: Specifies the local users who use a specified type of service.
• ftp: FTP users.
lan-access: LAN users, mainly users accessing the network through an Ethernet, such as 802.1X
•
users.
ssh: SSH users.
•
• telnet: Telnet users.
terminal: Terminal users who log in through console ports.
•
state { active | block }: Specifies local users in active or blocked state. A local user in active state can
access network services, but a local user in blocked state cannot.
user-name user-name: Specifies all local users using the specified username. The username must be a
case-sensitive string of 1 to 55 characters that does not contain the domain name.
vlan vlan-id: Specifies all local users in a VLAN. The vlan-id argument is in the range of 1 to 4094.
Usage guidelines
If no parameter is specified, the command displays information about all local users.
Examples
# Display information about all local users.
<Sysname> display local-user
Total 2 local users matched.
Device management user root:
State:
Service Type:
User Group:
Bind Attributes:
Authorization Attributes:
Work Directory:
User Role List:
Network access user jj:
State:
Service Type:
User Group:
Bind Attributes:
IP Address:
Location Bound:
MAC Address:
VLAN ID:
Authorization Attributes:
Idle TimeOut:
Work Directory:
ACL Number:
User Role List:
Active
SSH/Telnet/Terminal
system
flash:
network-admin
Active
Lan-access
system
2.2.2.2
3/3/2 (slot/subslot/port)
0001-0001-0001
2
33 (min)
flash:
2000
network-operator, level-0, level-3
23