Display Ipsec Sa - HP 6125XLG Command Reference Manual

<Sysname> display ipsec profile
-----------------------------------------------
IPsec profile: profile
Mode: manual
-----------------------------------------------
Description:
Transform set: prop1
Inbound AH setting:
AH SPI: 12345 (0x00003039)
AH string-key:
AH authentication hex key: ******
Inbound ESP setting:
ESP SPI: 23456 (0x00005ba0)
ESP string-key:
ESP encryption hex-key: ******
ESP authentication hex-key: ******
Outbound AH setting:
AH SPI: 12345 (0x00003039)
AH string-key:
AH authentication hex key: ******
Outbound ESP setting:
ESP SPI: 23456 (0x00005ba0)
ESP string-key:
ESP encryption hex key: ******
ESP authentication hex key: ******
Table 33 Command output
Field
IPsec profile
Mode
Description
Transform set
Related commands
ipsec profile

display ipsec sa

Use display ipsec sa to display information about IPsec SAs.
Syntax
display ipsec sa [ brief | count | interface interface-type interface-number | { ipv6-policy | policy }
policy-name [ seq-number ] | profile profile-name | remote [ ipv6 ] ip-address ]
Description
IPsec profile name.
Negotiation mode used by the IPsec profile. Only the manual
mode is available.
Description of the IPsec profile.
IPsec transform set referenced by the IPsec profile.
236