Dot1X Port-Control - HP 6125XLG Command Reference Manual

Usage guidelines
The multicast trigger function enables the device to act as the initiator and periodically multicast Identify
EAP-Request packets out of a port to detect 802.1X clients and trigger authentication. You can use the
dot1x timer tx-period command to set the interval for sending multicast Identify EAP-Request packets.
Examples
# Enable the multicast trigger function on Ten-GigabitEthernet 1/1/6.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/6
[Sysname-Ten-GigabitEthernet1/1/6] dot1x multicast-trigger
Related commands
display dot1x
•
dot1x timer tx-period
•
• dot1x unicast-trigger

dot1x port-control

Use dot1x port-control to set the authorization state for the port.
Use undo dot1x port-control to restore the default.
Syntax
dot1x port-control { authorized-force | auto | unauthorized-force }
undo dot1x port-control
Default
The default port authorization state is auto.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
authorized-force: Places the port in the authorized state, enabling users on the port to access the network
without authentication.
auto: Places the port initially in the unauthorized state to allow only EAPOL packets to pass, and after a
user passes authentication, sets the port in the authorized state to allow access to the network. You can
use this option in most scenarios.
unauthorized-force: Places the port in the unauthorized state, denying any access requests from users on
the port.
Usage guidelines
You can use this command to set the port authorization state to determine whether a client is granted
access to the network.
Examples
# Set the authorization state of port Ten-GigabitEthernet 1/1/6 to unauthorized-force.
93