Hwtacacs Nas-Ip - HP 6125XLG Command Reference Manual

Field
VPN Instance
NAS IP Address
Server Quiet Period
Realtime Accounting Interval(minutes)
Response Timeout Interval
Username Format
Related commands
reset hwtacacs statistics

hwtacacs nas-ip

Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo hwtacacs nas-ip to delete a source IP address for outgoing HWTACACS packets.
Syntax
hwtacacs nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
undo hwtacacs nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
Default
The source IP address of a packet sent to the server is the IP address of the outbound interface.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address, which must be an address of the device and cannot be 0.0.0.0,
255.255.255.255, a class D address, a class E address, or a loopback address.
ipv6 ipv6-address: Specifies an IPv6 address, which must be a unicast address of the device and cannot
be a loopback address or a link-local address.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the source IP address belongs,
where vpn-instance-name is a case-sensitive string of 1 to 31 characters. To configure a public-network
source IPv4 address, do not specify this option.
Usage guidelines
The source IP address of HWTACACS packets that a NAS sends must match the IP address of the NAS
that is configured on the HWTACACS server. An HWTACACS server identifies a NAS by IP address.
Description
MPLS L3VPN to which the HWTACACS server or scheme belongs. If
no VPN is specified for the server or scheme, this field displays Not
configured.
Source IP address for outgoing HWTACACS packets.
Quiet period for the primary servers, in minutes.
Real-time accounting interval, in minutes.
HWTACACS server response timeout period, in seconds.
Format for the usernames sent to the HWTACACS server. Possible
values include:
•
With-domain—Includes the domain name.
•
Without-domain—Excludes the domain name.
•
Keep-original—Forwards the username as it is entered.
58