HP 6125XLG Command Reference Manual page 15

authentication
radius-scheme-name ] [ local ] | ldap-scheme ldap-scheme-name [ local ] | local | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] }
undo authentication default
Default
The default authentication method of an ISP domain is local.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
ldap-scheme ldap-scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string of 1 to
32 characters.
local: Performs local authentication.
none: Does not perform authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The default authentication method is used for all users who support this method and do not have a
specific authentication method configured.
You can specify multiple default authentication methods, one primary and multiple backup methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence. For
example, the authentication default radius-scheme radius-scheme-name local none command specifies
a primary default RADIUS authentication method and two backup authentication methods, local
authentication and no authentication. With this command, the device performs RADIUS authentication
by default, performs local authentication when the RADIUS server is invalid, and does not perform
authentication when both of the previous methods are invalid.
Examples
# Configure the default authentication method for ISP domain test to use RADIUS scheme rd and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication default radius-scheme rd local
Related commands
hwtacacs scheme
•
ldap scheme
•
local-user
•
• radius scheme
default { hwtacacs-scheme hwtacacs-scheme-name
6
[ radius-scheme