HP 6125XLG Command Reference Manual page 192

sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des |
aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ publickey
keyname | source { interface interface-type interface-number | ipv6 ipv6-address } ] *
In FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
{ put | get } source-file-name [ destination-file-name ] [ identity-key rsa | prefer-compress zlib |
prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14
| prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname
| source { interface interface-type interface-number | ipv6 ipv6-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies an IPv6 server by its address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance that the server belongs to, where
the vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
-i interface-type interface-number: Specifies the outgoing interface used by the client to connect to the
server. The interface-type interface-number argument specifies the outgoing interface by its type and
number. This option is only used when the server uses a link-local address and the specified outgoing
interface on the client must have a link-local address.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the directory of the source file.
destination-file-name: Specifies the directory of the target file. If this argument is not specified, the
directory names of the source and target files are same.
identity-key: Specifies the public key algorithm for the client, either dsa or rsa. The default is dsa. If the
server uses publickey authentication, this keyword must be specified.
• dsa: Specifies the public key algorithm dsa.
rsa: Specifies the public key algorithm rsa.
•
prefer-compress: Specifies the preferred compression algorithm between the server and the client. By
default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is aes128.
Algorithms des, 3des, aes128, and aes256 are arranged in ascending order in the aspects of security
strength and calculation time.
3des: Specifies the encryption algorithm 3des-cbc.
•
aes128: Specifies the encryption algorithm aes128-cbc.
•
aes256: Specifies the encryption algorithm aes256-cbc.
•
183