Sftp - HP 6125XLG Command Reference Manual

sftp

Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number s | ip ip-address } ]
*
In FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key rsa | prefer-compress zlib
| prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14
| prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname
| source { interface interface-type interface-number s | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies a port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance that the server belongs to, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters.
identity-key: Specifies the public key algorithm for the client, either dsa or rsa. The default is dsa. If the
server uses publickey authentication, this keyword must be specified.
dsa: Specifies the public key algorithm dsa.
•
rsa: Specifies the public key algorithm rsa.
•
prefer-compress: Specifies the preferred compression algorithm between the server and the client. By
default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is aes128.
Algorithms des, 3des, aes128, and aes256 are arranged in ascending order in the aspects of security
strength and calculation time.
3des: Specifies the encryption algorithm 3des-cbc.
•
• aes128: Specifies the encryption algorithm aes128-cbc.
aes256: Specifies the encryption algorithm aes256-cbc.
•
des: Specifies the encryption algorithm des-cbc.
•
185