Accounting Lan-Access - HP 6125XLG Command Reference Manual

Examples
# Configure the default accounting method for ISP domain test to use RADIUS scheme rd and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting default radius-scheme rd local
Related commands
hwtacacs scheme
•
local-user
•
radius scheme
•

accounting lan-access

Use accounting lan-access to configure the accounting method for LAN users.
Use undo accounting lan-access to restore the default.
Syntax
In non-FIPS mode:
accounting lan-access { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }
undo accounting lan-access
In FIPS mode:
accounting lan-access { local | radius-scheme radius-scheme-name [ local ] }
undo accounting lan-access
Default
The default accounting method for the ISP domain is used for LAN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local accounting.
none: Does not perform accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
You can specify multiple accounting methods, one primary and multiple backup methods. When the
primary method is invalid, the device attempts to use the backup methods in sequence. For example, the
accounting lan-access radius-scheme radius-scheme-name local none command specifies a primary
RADIUS accounting method and two backup accounting methods, local accounting and no accounting.
With this command, the device performs RADIUS accounting by default, performs local accounting
3