Arp Source-Suppression Limit - HP 6125XLG Command Reference Manual

undo arp source-suppression enable
Default
ARP source suppression function is disabled.
Views
System view
Predefined user role
network-admin
Usage guidelines
Configure this feature on the gateway devices.
Examples
# Enable the ARP source suppression function.
<Sysname> system-view
[Sysname] arp source-suppression enable
Related commands
display arp source-suppression

arp source-suppression limit

Use arp source-suppression limit to set the maximum number of unresolvable packets that can be
received from a device in 5 seconds.
Use undo arp source-suppression limit to restore the default.
Syntax
arp source-suppression limit limit-value
undo arp source-suppression limit
Default
The maximum number is 10.
Views
System view
Predefined user roles
network-admin
Parameters
limit-value: Sets the maximum number of unresolvable packets that can be processed in 5 seconds. It is
in the range of 2 to 1024.
Usage guidelines
If the number of unresolvable packets from a host within 5 seconds exceeds the specified threshold, the
device stops processing packets from that host until the 5 seconds elapse.
Examples
# Set the maximum number of unresolvable packets that can be received from a device in 5 seconds to
100.
207