Plu Name Programming - TEC MA-600 Series Owner's Manual

4. PROGRAMMING OPERATIONS
4.13

PLU Name Programming

A maximum of 16 characters of PLU name is programmed here.
Any time outside a sale
CONDITION
Mode Lock: SET
OPERATION
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key three times then
Select a PLU of which name is to be
programmed with the [↑] or [↓] key.
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
Main Menu
or
Depress [2].
[Enter].
or
Depress [4].
[Enter]
Input a PLU name.
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" for various name programming is selected.
"4 PLU (ITEM NO.) NAME" is selected.
The PLU name already programmed is displayed.
The ECR enters PLU name input mode.
A maximum of 16 one-byte or 8 two-byte characters are input.
The PLU name is entered and printed.
This programming is ended.
display returns to Main Menu
4-34

4.13 PLU Name Programming

31-10-2005 MON #0
GROUP
01 FRESH
0036 13:16TM
A long receipt is issued and the
screen.
EO1-11154