Securing A Device In The Module Bay - Dell OptiPlex 755 User Manual

1. To remove a device installed in the module bay, double-click the Safely Remove Hardware icon on the taskbar.
2. In the list of devices that appears on your screen, click the device you want to eject.
NOTE: You cannot remove a device if your computer is turned on and the device is locked in the module bay. You must shut down the computer
and follow the steps in
NOTICE: Do not place any heavy objects on top of the computer. Doing so may bend the chassis and cause difficulty in removing a module device.
3. When a computer message indicates that you can remove the device, remove the device from the module bay.
4. Slide the new device into the module bay.

Securing a Device in the Module Bay

1. To secure a device in the module bay, your computer is equipped with a module locking switch. To use this switch:
a. Remove the computer cover (see
b. Gently press the module locking switch down until it locks into place.
c. Replace the computer cover (see
The module cannot be removed from the computer until you lift the module locking switch into its unlocked position.
2. You may also secure a device in the module bay by using a security screw (packaged separately), accessed from the bottom of the computer.
1 bottom of computer
2 security screw
Installing a Device When Your Computer Is Turned Off
Removing the Computer
Replacing the Computer
to remove a locked device.
Cover).
Cover).