Installing A Floppy Drive - Dell OptiPlex 755 User Manual

Hide thumbs Also See for OptiPlex 755:
Table of Contents

Advertisement

1 drive release latch
2 floppy drive
 
5. Disconnect the power and data cables from the back of the floppy drive.
 
6. If you are not replacing the floppy drive or media card reader at this time, install the floppy drive inserts (see
need a drive bay insert.
 

Installing a Floppy Drive

 
1. If you are installing a new floppy drive
a.  Remove the drive inserts (see
b.  Pull to remove the floppy drive insert that should be installed in the drive bay.
c.  Remove the four shoulder screws from the drive panel insert.
1 drive insert
 
2. If you are replacing an existing floppy drive:
Remove the four shoulder screws from the existing drive or media card reader.
 
3. Insert the four shoulder screws into the sides of the new floppy drive and tighten them.
Removing Drive
Inserts).
Replacing Drive
Inserts). Contact Dell if you

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents