Securing a Device in the Module Bay
1 To secure a device in the module bay, your computer is equipped with a module locking switch. To use
this switch:
Remove the computer cover (see "Removing the Computer Cover" on page 232).
a
Gently press the module locking switch down until it locks into place.
b
Replace the computer cover (see "Replacing the Computer Cover" on page 317).
c
The module cannot be removed from the computer until you lift the module locking switch into its
unlocked position.
2 You may also secure a device in the module bay by using a security screw (packaged separately),
accessed from the bottom of the computer.
259
Module Bay