▼
Improve the copy quality according to the type of image
Press the Extra key.
1
Select 'Original type' with the
2
Press the
3
Select 'Lines/text', 'Blueprint' or 'Photo' with the
4
Press the
5
Select the needed original type.
6
Press the confirm key.
7
Deliver originals after scanning
You can choose for delivery of the original at the front (rewind) or the rear side
of the scanner. Use the output at the rear side of the scanner if your originals
are:
thick
■
very thin
■
damaged
■
in a carrier sheet.
■
The rewind setting will return to default when,
the 'cancel' key is pressed,
■
the panel time out has exceeded.
■
▼
Enable the rewind function
Press the Extra key.
1
Select 'Scanner' with the
2
Press the
3
Select 'Rewind original' with the
4
Press the
5
Select 'on' or 'off' with the
6
Press the 'confirm' key.
7
Enable automatic feed of the original
To increase the productivity enable Automatic feed, no need to press the Start
key, except for the first original. If you disable automatic feed you must press
the Start key.
50
Océ TDS320 User Manual
key to enter the 'Original type' menu.
key to enter the 'Lines/text', 'Blueprint' or 'Photo' menu.
or
key, to enter the 'Scanner' menu.
key, to enter the 'Rewind original' menu.
or
or
key.
key.
or
key.
key.
or
key.