Mirror-Image Copies; Release Original - Oce TDS320 User Manual

Mirror-image copies

You can make a mirror-image copy of an original, as shown in the next figure:
[14] Example of a mirror-image copy
▼
To make a mirror-image copy
Press the Extra key.
1
Select 'Paper copy' with the
2
Press the
3
Select 'Mirror' with the
4
Press the
5
Select 'on' or 'off with the
6
Press the confirm key.
7

Release original

For originals on thinner types of media you can enable Release original. With
Release original enabled the original will be fully released after it is scanned.
Press the Extra key.
1
Select 'Scanner' with the
2
Press the
3
Select 'Release orig.'with the
4
Press the
5
Select 'on' or 'off' with the
6
Press the Confirm key.
7
Make other settings if required.
8
Feed the original.
9
Press the Start key.
10
The original is fully released after the scanner has completed its scan run.
Use the Océ TDS320 to copy
or
key to enter the 'Paper copy' menu.
or
key to enter the 'Mirror' menu.
or
or
key to enter the 'Scanner' menu.
or
key to enter the 'Release orig.' menu
or
key.
key.
key.
key.
key.
key.
57