Oce TDS320 User Manual page 24

▼
Set the media width settings
Press the On-line key to put the printer off-line.
1
Select the 'Media settings' item with the
2
Press Next/select to enter the 'Media settings' menu.
3
Select 'Roll 1'or
4
Press Next/select to enter the 'Roll' or 'Manual feed' menu.
5
Select the 'Width' item with the
6
Press Next/select to enter the 'Width' menu.
7
Select the desired width with the
8
Press Next/select to confirm the selected width.
9
Press On-line to put the printer on-line again.
10
▼
Set the media type settings
Press the On-line key to put the printer off-line.
1
Select the '
2
Press Next/select to enter the 'Media settings' menu.
3
Select 'Roll 1'
4
Press Next/select to enter the 'Roll' or 'Manual feed' menu.
5
Select the 'Material' item with the
6
Press Next/select to enter the 'Material' menu.
7
Select the desired media material with the
8
Press Next/select to confirm the selected media material.
9
Press On-line to put the printer on-line again.
10
24 Océ TDS320 User Manual
Roll 2' with the
'
edia settings' item with the
M
Roll 2' Manual feed' with the
, ' , '
or key.
or key.
or key.
or key.
or key.
or
or key.
or key.
key.