▼
Set or Change destination properties
Select a destination.
1
From the 'File' menu select 'Properties' or click the 'Properties' button on the
2
toolbar (see figure 21).
[21] 'Properties' button on the toolbar
The 'Destination properties' screen appears as in figure 19 on page 71.
Change the destination properties as described in 'Create a local destination'
3
on page 70.
Scanned files
The right pane of the Scan Manager contains the scanned files and additional
information about the files. You can view, print and delete these files. You can
also view the file properties.
▼
View a scanned file
Select a file in the right pane.
1
From the 'File' menu select 'View' or click the 'View' button on the toolbar
2
(see figure 22).
[22] 'View' button on the toolbar
Océ View Station LT starts and displays the file.
When you make a scan Océ View Station LT starts automatically, and
Note:
shows the result of the scan.
▼
Print a scanned file
Select a file in the right pane.
1
From the 'File' menu select 'Print' or click the 'Print' button on the toolbar
2
(see figure 23).
[23] 'Print' button on the toolbar
The selected file will be printed with the default settings as defined in the Océ
Settings Editor.
74
Océ TDS320 User Manual