Oce TDS320 User Manual page 105

When an Apply is performed, first the contents of the current settings is copied
to the backup file. There are two versions of this file, one for KO settings and
one for SA settings. These files are always stored on the system.
▼
Load a settings file
Open the 'File' menu and select 'Open'.
1
A dialog box is displayed from where you can choose the right file.
Click the 'Apply' button.
2
The loaded settings are transferred to the system.
This is only possible if the user is logged in as a Key Operator or System
Note:
Administrator.
Océ Power Logic®: The Settings Editor 105