Media; The Paper Rolls - Oce TDS320 User Manual

Media

The Océ TDS320 is available with a roll unit for one or two rolls.
Each of the rolls on the Océ TDS320 can be loaded with print material of a
different size or type. The size and type of the available media are indicated on
the operator panel.
Attention:
size of the material and the type of print material (paper, transparent, or
polyester). Refer to 'Media type and size on the printer' on page 23.
The definition of the size and type of the new print material is required to:
Enable the automatic media switch function to work correctly.
■
Support auto format functions.
■

The paper rolls

When a roll is empty during a print job, a 'Roll empty' message is displayed
at the printer operator panel and on the Océ System Control Panel application.
You then have to load a new roll of print material.
You can use the following media for the Océ TDS320:
Note:
Plain paper 64 g/m2 (55 g/m2)
■
Plain paper 75 g/m2 (110 g/m2)
■
Biotop paper 80 g/m2
■
Green label 80 g/m2
■
Recyonomic 80 g/m2
■
Transparent paper 75 g/m2
■
Transparent paper 90/95 g/m2 (80/85 g/m2)
■
Transparent paper 110/115 g/m2
■
Translucent 60 g/m2
■
Vellum 20 lbs (16 lbs)
■
Film 3.5 mil (4 mil)
■
Film 4.5 mil
■
110 Océ TDS320 User Manual
When you load new print material, you must tell the system the