Left Toolbar; Settings Area - Oce TDS320 User Manual

These settings can only be saved in Key Operator or System
Note:
Administrator mode.
Apply
become effective. Initially, this button is disabled. It is enabled after the first
setting is changed and disabled again after the apply action is performed or
after an undo action.
This button restores the settings to the state it was in the last time the
Undo
settings were applied (and not back to the factory default). Initially, the 'Undo'
button is disabled. This button is enabled the moment the first setting is
changed. It is disabled after an Apply action is performed or after an undo
action

Left toolbar

There are four different buttons available at the left toolbar of the Océ Settings
Editor. These are 'Jobs', 'Printer', 'Scanner' and 'System'. Each button
provides access to a specific group of settings. By clicking on each of these
buttons, you can get access to the settings related to the selected group.
A shadow highlight is used to indicate which button is activated.
[39] Left toolbar

Settings area

The settings area consists of two parts: a setting tree and an update area.
Océ Power Logic®: The Settings Editor
When you click on the 'Apply' button, the changes you have made
101