The Keys - Oce TDS320 User Manual

The keys

The Input key
The Output key
The Extra key
return to the normal mode. Set the properties for the original, the scanned files
and for the scanner in the Extra mode.
The Browse keys (left
the display shows. Browse the preset zoom values.
The Browse keys (up
structure as the display shows. Adjust the zoom value with an accuracy of 1
percent.
The Confirm key
press the confirm key a second time in the current menu item, you restore the
previous setting.
The Strip key
The icon flashes. Use the browse keys
the value. The icon remains on if you press another settings key and select a
different value than the default value.
The Cancel key
value. Press this key twice to change all settings to their default values. The
scan stops if you press this key.
The - and + keys
The Start key
copy process.
The Zoom key
(left
,
down ) to adjust the zoom value with an accuracy of 1 percent.
The Exposure key
keys to change the exposure value.
The Media key
Use the Océ TDS320 to copy
Select a single original or a set originals.
Select copy or file (scan-to-file) as your output.
This key allows you to enter the Extra mode of the scanner and
right )
,
, down
Confirm the current setting in the menu structure. If you
Press this key to add or to remove a 'leading' or a 'trailing' strip.
Press this key one time to set the copy counter to the default
Change the number of copies.
Press the green start key
Enters the zoom mode. The icon flashes. Use the browse keys
right ) to browse the preset zoom values. Use the browse keys (up
enters the exposure mode. The icon flashes. Use the browse
Select roll 1, roll 2 or manual feed. The equivalent icon is on.
Move in one level of the menu structure as
Move between the levels of the menu
)
(left right , up
,
to start the scan or to restart the
to change
, down )
39
,