Paper jam in the fuser section
Caution:
Because of hot surfaces the operator always has to be cautious and wear
heat-protective gloves when he removes material in the fuser section.
▼
How to clear a jam in the fuser section
Press the On-line / Off-line key to turn the printer off-line.
1
Loosen the screw at the left hand side of the machine and open the cover (see
2
figure 60).
[60] Unscrew the knurled nut to open the cover
Lift the green handle (see figure 61).
3
[61] Lift the green handle
Open the fuser unit (see figure 62).
4
128
Océ TDS320 User Manual
Open the fuser only to remove the paper after a media jam.