System Features Menus; Menu #1 - Basic Features - Clarion UNGO ProSecurity S100 Installation Manual

2. Then press the Override switch once more and hold it.
For example, if you just programmed the third feature in the menu and you would like to program the
seventh feature in the menu, you would press and release the Override switch four times and then press
it once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.
To select another menu:
1. Press and hold the Override switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to pro-
gram a feature in Menu #2, you press and hold the Override button. After three seconds, the siren
chirps twice indicating access to Menu #2.
To exit the learn routine do one of the following:
Close the open door.
Turn the ignition on.
No activity for longer than 15 seconds.
Press the Override switch too many times.

system features menus

menu #1 - basic features

Items in bold text have been programmed to the default setting at the factory.
Feature One Chirp
Number Setting
1-1 Active arming
1-2 Chirps ON
1-3 Ignition controlled door locks ON
1-4 Active locking only
1-5 Panic with ignition ON
1-6 0.8 second door lock pulses
1-7 Forced passive arming ON
1-8 Automatic Engine Disable ON
1-9 Armed When Driving
1-10 Anti-code grabbing ON
Two-Chirp
Setting
Passive arming
Chirps OFF
Ignition controlled door locks OFF
Passive locking
No panic with ignition ON
3.5 second door lock pulses
Forced passive arming OFF
Automatic Engine Disable OFF
Anti-Carjacking System
Anti-code grabbing OFF
15